Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in The Heights?
Spring replacement in The Heights typically costs $180 – $340 for one spring, including the part and the labor to install and balance it. If your door uses a matched pair of torsion springs, and most two-car doors do, expect about twice that, since both springs are almost always replaced at the same time. The written estimate we give you before any work starts is what sets the final price.
That range covers a straightforward replacement on a standard residential door. What it doesn’t cover is a spring that failed and took a cable, a bent track or a damaged bottom section with it. We look at the whole door before quoting, because replacing a spring on a door that’s out of alignment just shortens the life of the new spring.
We answer 24/7 at (855) 784-2291, and we offer fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we work on the eight major brands you’re most likely to have on your door: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Key Takeaways
- One spring replaced in The Heights: typically $180 – $340.
- A matched pair, which is the normal replacement, runs about double that.
- Spring repair is a job for a trained technician. A wound torsion spring holds enough stored force to injure someone badly if it lets go.
- If you have a broken spring, the door should stay down until it’s fixed. Don’t force the opener.
- Free estimates, and the written quote sets the price.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break out for a typical spring job on a home in The Heights. These are estimated ranges for the work, not a quote for your specific door. The final price depends on the spring type, the door’s weight and size, and whether anything else got damaged when the spring failed.
| Line item | Typical estimated cost |
|---|---|
| One torsion or extension spring, replaced | $180 – $340 |
| Matched pair of springs (usual for a two-car door) | About twice the single-spring range |
| Cable repair, if the spring failure damaged a cable | $130 – $250 |
| Roller replacement, if the rollers are worn | $110 – $220 |
| Track realignment, if the door shifted when the spring broke | $120 – $240 |
| Panel replacement, if a panel was bent or dented | $250 – $500 |
| Opener repair, if the opener was strained by a heavy door | $120 – $320 |
| General garage door repair (broader repairs) | $150 – $600 |
| New door installation, if a repair no longer makes sense | $700 – $2200 |
Why does the price move around within that $180 – $340 band? A few things. Torsion springs, which mount on a shaft above the door and do most of the lifting on heavier modern doors, take more care to set than the older extension springs mounted along the sides. Heavier doors, oversized doors, and doors with high-lift or unusual track layouts need springs rated to match, and higher-rated springs cost a bit more. If the spring broke and dropped the door, the impact can bend a track or a hinge, and that’s extra work on top of the spring itself.
What doesn’t change the price is the time of day you call. We don’t charge more for a same-day job or for a call that comes in outside the usual window. The estimate is per job, and the written estimate is the number that stands.
For a closer look at what a full replacement involves and how we match spring size to door weight, see our page on spring replacement.
What Affects Spring Replacement Pricing in The Heights
The Heights is an older, established neighborhood, and that shapes what we find on a lot of these jobs. Homes here range from early twentieth-century bungalows to newer builds, and the garage doors show it. A few things drive the price up or down more than anything else:
- Spring type and door weight. Extension springs on older, lighter doors are usually the simpler job. Torsion springs on heavier modern doors take longer to set correctly, and both springs should be rated to the door’s actual weight. A mismatched spring is the most common reason a replacement fails early.
- Single spring vs. matched pair. Two-car doors typically run two springs. When one breaks, the other has usually seen the same wear, so replacing both at once avoids a second service call within months. It costs more upfront but is the cheaper path over time.
- Whether the failure caused secondary damage. A spring that snaps while the door is up can drop the door hard. Cables, tracks, hinges and panels take the hit, and those repairs add to the total.
- Door age and component condition. On an older door in The Heights, a spring replacement is often the moment to check rollers, hinges and the opener’s lifting force. A strained opener that couldn’t lift a heavy door may also need service.
- Access and door clearance. Tight garages, low headroom over the door, and doors that open onto an alleyway can add time to the job. We look at clearance before quoting so there are no surprises.
- Whether a technician has actually inspected the door. The most common hidden cost is a spring sized wrong for the door. We measure and match the spring to your door, which is why our quotes hold up after the work is done.
Why Spring Repair Isn’t a Do-It-Yourself Job
A torsion spring is under a lot of stored tension, even when the door is down. Winding one by hand with the wrong tools, or letting it slip, is how serious injuries happen. That’s the whole reason a snapped spring is one of the few garage door problems we tell people not to tackle themselves. Leave the door down, keep the opener off, and let a trained technician handle it.
If you want to check the door safely before calling, here’s what you can do from a distance:
- Look at the springs above the door. A visible gap in a torsion spring, or an extension spring stretched straight, means it’s broken.
- Try to lift the door by hand with the opener disengaged, but stop if it feels heavy. A door that won’t lift easily is a door with a broken or failing spring.
- Don’t run the opener on a door with a broken spring. It strains the motor and can pull the door down.
Everything past that checkpoint is work for someone who does it every day. That’s the service we’re built around. Garage door repair is all we do, and springs are the part of the trade a lot of generalists won’t touch. Every technician here works on garage doors exclusively, with up to 10 years of experience on this kind of system, so a spring job gets diagnosed correctly the first time.
How to Save on Spring Replacement
There’s no discount to chase here. The savings come from doing the job right once. A few practical habits keep the bill at the bottom of the range instead of the top:
- Replace both springs at once when one breaks. Two springs that went in together wear together. Replacing one and then paying for a second call in a few months is usually the more expensive route, and a matched pair is the standard recommendation.
- Fix it before the door drops. A spring that’s stretching, sagging, or making a loud bang on opening is on its way out. Catching it early keeps the door from falling and damaging tracks, panels and cables.
- Get the whole door checked in one visit. Rollers, cables and hinges wear alongside the springs. Having them looked at during the same visit is cheaper than calling back for each one.
- Ask for the estimate in writing. We give a written estimate before we start, and that number is the price. That way there’s nothing added for parts or surprises after the fact.
- Don’t let the opener take the strain. If the door’s been hard to lift, the opener has been doing the spring’s job. Getting the spring fixed protects the opener and saves a repair later.
Estimates are free. Call (855) 784-2291 and we’ll talk through what your door is doing and give you a range before anyone comes out.
When a Repair Costs More Than a Spring
Sometimes the spring is the small part of the bill. If the door is old, panels are dented, and the opener is struggling, the math can shift toward a new door. New door installation in The Heights runs an estimated $700 – $2200 depending on door size, material and whether the opener and track go in with it. That’s a bigger number than a spring fix, and it’s worth getting an honest comparison before you commit to either. If a repair makes sense, we’ll say so. If a door is past the point where a spring replacement buys you much time, we’ll say that too.
Our range of work runs from a single spring all the way through opener repair and a full new door, so you’re not sent to a second company for the rest of the job. We also supply the replacement parts directly, which means we’re not waiting on an outside supplier to finish your repair.
Do You Work on All Spring and Door Brands?
We work on the eight brands you’re most likely to have on your door: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Spring systems themselves are largely about matching tension to door weight rather than brand, but knowing the door and opener brand tells us a lot about how the system was built and what to check first. We see these brands every day and know exactly what to look for on each.
Same-Day Spring Repair in The Heights?
Yes, in most cases we can get a technician to a spring job the same day. Call (855) 784-2291 and we’ll get you booked. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside those dispatch hours is booked into the next opening. We’re closed on Saturday.
The local pro who comes out is licensed and insured as Texas requires, and we stand behind the work. If a spring we installed fails, we come back and make it right.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in The Heights?
Replacing one spring in The Heights typically runs $180 – $340, including labor. A matched pair, which is standard on most two-car doors, is about twice that. The written estimate sets the final price. Call (855) 784-2291 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper than replacement when the door itself is sound. A spring replacement at $180 – $340 is a fraction of a new door at $700 – $2200. Replacement only makes sense when the door is old, damaged or failing in several places at once. We’ll tell you which one applies to your door.
Why does a pair of springs cost about double a single spring?
Because you’re buying two springs instead of one, each rated to the door’s weight. Most two-car doors run a matched pair, and both get replaced together since they wear at the same rate. The per-spring labor is similar, so the total is roughly double the single-spring range.
Can a broken spring damage anything else on the door?
Yes. A spring that snaps while the door is up can drop the door hard, bending tracks, snapping a cable, or denting a panel. Those repairs add to the total: cable repair runs $130 – $250, track realignment $120 – $240, and a panel $250 – $500. That’s another reason to fix a weakening spring before it lets go.
Do you charge extra for a same-day or night-time call?
No. We don’t add a premium for same-day work or for a call that comes in outside the usual window. The price is set per job by the written estimate. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
What brands of springs and doors do you work on?
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. Since springs are matched to door weight rather than brand, we measure your door and fit the correct spring for it. Call (855) 784-2291 to book an estimate.
How do I know if my spring is broken or just worn?
A broken torsion spring usually shows a visible gap in the coil; a broken extension spring is stretched straight. A worn-but-intact spring may make a loud bang, sag, or leave the door hard to lift. Either way, keep the door down, don’t run the opener, and call (855) 784-2291 to have it checked.
One Call Covers the Whole Job
A snapped spring leaves you with a door you can’t safely use, and the last thing you need is a runaround between a generalist who won’t touch it and a parts supplier with a wait. Here, springs are a core service, every technician works on garage doors exclusively, and we supply the parts directly. From a single spring to a full new door, one call covers it. Call (855) 784-2291 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Garage Door Repair The Heights.
Pricing reflects the The Heights market as of 2026. Garage Door Repair The Heights offers free estimates – call (855) 784-2291.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Marisol Salazar"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Kristen Barrett"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Xavier Dawson